Search results for "oxidizing agent"
showing 10 items of 71 documents
Reactive Sintering of molybdenum disilicide by Spark Plasma Sintering from mechanically activated powder mixtures: Processing parameters and properti…
2008
Abstract Dense molybdenum disilicide with a nano-organized microstructure was synthesized by mechanical activation, by producing nanostructured agglomerates of a 1:2 mixture of Mo and Si, followed by the synthesis/consolidation in one step using SPS technology. In order to synthesize a dense molybdenum disilicide with a perfectly controlled microstructure, an investigation of the influence of Spark Plasma Sintering processing parameters (temperature, heating rate, mechanical pressure and holding time) on the chemical composition and the microstructure characteristics has been performed. The present work shows also that the so-obtained materials present better oxidation resistance in compari…
Thermal oxidation of the intermetallic phases Al 8 Mo 3 and AlMo 3
2017
Abstract The thermal oxidation reactions of the intermetallic phases Al8Mo3 and AlMo3 were investigated and analyzed by ex-situ powder-x-ray diffraction (XRD), difference thermal analysis (DTA), thermogravimetry (TGA), and infrared spectroscopy (IR). The initial oxidation reactions in air were found to yield Al2O3 and AlMo3 in the case of Al8Mo3 (Tonset =725 °C), and MoO3 as well as Al8−xMo3 (Tonset =435 °C) for the pure intermetallic phase AlMo3, respectively. Thus, both intermetallic phases are coexisting in an equilibrium within a temperature range of 300 °C under oxidizing conditions. The formation of β-Al2(MoO4)3 followed the second oxidizing process of the respective minority componen…
Selective Formation of 4,4'-Biphenols by Anodic Dehydrogenative Cross- and Homo-Coupling Reaction.
2019
A simple and selective electrochemical synthesis by dehydrogenative coupling of unprotected 2,6- or 2,5-substituted phenols to the desired 4,4'-biphenols is reported. Using electricity as the oxidizing reagent avoids pre-functionalization of the starting materials, since a selective activation of the substrates takes place. Without the necessity for metal-catalysts or the use of stoichiometric reagents it is an economic and environmentally friendly transformation. The elaborated electrochemical protocol leads to a broad variety of the desired 4,4'-biphenols in a very simplified manner compared to classical approaches. This is particular the case for the cross-coupled products.
Fine chemistry by TiO2 heterogeneous photocatalysis
2021
Abstract Heterogeneous TiO2 photocatalysis is a promising technology based on the capability of the semiconducting material to generate charges upon irradiation of suitable energy. The photogenerated electrons and holes, in turn, induce redox reactions involving species adsorbed on the surface of the photocatalyst, giving rise to chemical transformations. The presence of highly oxidizing radicals, thus generated, has long led to consider TiO2 photocatalysis only a nonselective oxidation process. In fact, so far it is possible to find in the literature many examples of its use in the field of environmental remediation aimed at the degradation of harmful molecules, although the studies are al…
Imidazolsynthesen, 8. Mitt.: N-Substituierte Imidazole nach Weidenhagen
1976
Die Weidenhagen-Synthese N-unsubstituierter Imidazole aus α-substituierten Carbonylverbindungen 1, Aldehyden 3, wasrigem Ammoniak (4) und Kupfer(II)-salzen als Oxidationsmittel ist in Gegenwart primarer Amine 5 auch zur Darstellung N-substituierter Imidazole 6 geeignet. Weidenhagen Synthesis of N-Substituted Imidazoles The Weidenhagen synthesis of N-unsubstituted imidazoles from α-substituted carbonyl compounds 1, aldehydes 3, and aqueous ammonia (4) with copper (II) salts as oxidizing agents is also usable for the synthesis of N-substituted imidazoles 6 through the addition of primary amines 5.
Determination of the herbicide benfuresate by its photo-induced chemiluminescence using flow multicommutation methodology.
2007
The present paper deals with an analytical strategy based on coupling photo-induced chemiluminescence in a multicommutation continuous-flow methodology for the determination of the herbicide benfuresate. The solenoid valve inserted as small segments of the analyte solution was sequentially alternated with segments of the NaOH solution for adjusting the medium for the photodegradation. Both flow rates (sample and medium) were adjusted to required time for photodegradation, 90 s; and then, the resulting solution was also sequentially inserted as segments alternated with segments of the oxidizing solution system, hexacyanoferrate (III) in alkaline medium. The calibration range from 1 microg L(…
Digestion-free determination of heavy metals (Pb, Cd, Cu) in honey using anodic stripping differential pulse voltammetry and potentiometric stripping…
1995
Experiments have been carried out to assess the potential of differential pulse voltammetry and potential stripping analysis for determining Pb, Cu and Cd directly in dissolved honey samples using a flow-through cell. With the hanging mercury drop electrode Pb alone can be determined only if the electrode is first modified in-situ with Triton X 100 to increase the separation between the Pb peak and a broad, interfering adsorption peak which overlaps the Cu peak. If the (more sensitive) thin film mercury electrode is used the interference encountered is less so also Cu and Cd can be determined. With potentiometric stripping analysis Cu and Pb can be determined using normal procedures. The de…
Chromia on silica and zirconia oxides as recyclable oxidizing system: structural and surface characterization of the active chromium species for oxid…
2004
Chromium oxide samples supported over silica and zirconia were prepared by wet impregnation of the supports with aqueous solution of CrO3. In order to investigate the influence of the preparation method on the chromium dispersion and oxidation state, one sample was prepared by sol-gel technique. The materials were structurally characterized by XRD analysis. The oxidation states of chromium species were investigated by XPS, DRS and TPR/TPO techniques. EPR analyses were also carried out for the sample Cr/SiO2, that due to the low crystalline state exhibits broad XPS signals. In this case, particular attention was paid to the presence of Cr(V) and Cr (III) species and their concentration. The …
Photocatalytic green synthesis of piperonal in aqueous TiO2 suspension
2014
Abstract Piperonal (heliotropine or 3,4-methylenedioxybenzaldehyde) has been synthesized by oxidizing piperonyl alcohol in aqueous UV-irradiated TiO2 suspensions. This compound was identified by GC–MS chromatography, 1H NMR and melting point determination. The other products of the photoprocess were 1,3-bis(3,4-(methylenedioxy)benzyl) ether (found in traces) and CO2, derived from the parallel pathway of photo-mineralization. Commercial and home-prepared TiO2 samples have been tested and the best selectivity (ca. 35%) was obtained by using the home-prepared ones. The reported green process allows to obtain an added value product (piperonal), upon partial oxidation of a cheap reagent.
Temptative Modeling of Surface Reactivity with Oxidizing-Reducing Mixtures on Rutile TiO2-δ
1989
Rutile bears some unique features in regard to oxygen transfer with the outer atmosphere, at high temperatures. It possesses very high chemical diffusivity. This diffusivity becomes apparent while performing reequilibration experiments in a final atmosphere of pure oxygen. Conversely, the oxidizing-reducing reaction with CO/CO2 mixtures at the rutile surface is always a slow process.